You will need to know this when you fit a new stereo into your vehicle. Moreover, the most initial step that you need to do after purchasing the stereo is connecting the wiring harness onto the adapter. This is the adapter that will connect your stereo to your vehicle. Further, the most important part is to make a long-lasting tight connection with the wires.

Our methods below will ensure you that your stereo wire connection is secure and will last for many years. Furthermore, it will also ensure that your car stereo is working just as fine as intended.

So now let us know how to connect car stereo wires without delays.

How Can You Connect Both of The Wires?

Almost all the connections will need you to splice both ends of the wires together. However, we have given some of the best ways to do it. Furthermore, it will ensure that your stereo is working just well.

Pair of Wire Soldering

The most confident connection is made by soldering. The connection is insulated and protected by heat shrink tubing. You need a wire stripper to remove the insulation plastic from the end of the wires. This is one of the steps for how to connect car stereo wires together.

Usage of The Posi Product Connector

You can use the Posi product connector to simply attach and make them stay solid in place. Furthermore, we rate this as our favorite method due to the impeccable quality and simplicity of the connector and the method. So now you know one of the impeccable steps for how to connect car stereo wires together.

Making The Wires Crimp

You can also make a very strong reliable connection by crimping the wires. However, you need a crimping tool along with crimp caps to start the process. Further, there is a drawback to this process. if you fail to crimp the wires tight, they might become loose over time due to shaking or any jerking.

We advise you to tight them properly before installing the car stereo. This will prevent loss and further cable connection troubles.

However, you might want to know how can you tap them into the existing wires. We have explained it below.

How Can You Tap into Old Wires?

You can use the Posi tap connectors to connect the old wire to the news wires. They are very easy and secure to tap in. Moreover, they are just like wire connectors.

Using soldering for Tapping

You can use soldering to get your job done. Moreover, this is a very old method that really works.

Using T Splice for Tapping

The T-Splice tapping method is also known as the mechanical splice method. This method is known to be very solid as they make very good connections among their own wires. However, this might become the only way to complete your work. Moreover, we advise you to practice it on a workbench or table.

You can install the wires like a pro. At first, it might seem tough after seeing the bunch of wires. Moreover, it might feel complicated on the first time installation. However, if you have done this installation before, you will find it very easy to install the wires of the car stereo.

You can do the work easily with patience. Take some time to connect all the wires and you will be ready to go easily. However, do not mess up all the wires as this might end up being too much complicated.

Before you start your work, you should know some facts.

The First Most Important Thing

You should take some notes before you end up visiting the local shop store to buy the car stereo for your vehicle. Further, take some points into consideration given below.

What type of car is your vehicle?

There are specific recommendations for car stereo. This means every stereo might not fit into every car. There are specific models and sizes of stereo to fit in your vehicle infotainment chassis. Therefore, you should find the perfect match of stereo for your vehicle.

What type of stereo do you desire of buying?

There are several stereo options. Some stereo comes with built-in USB and Bluetooth. Moreover, some stereos are equipped with apple car play and android auto. Therefore, you should consider which one to buy before visiting the store.

Painless fixing

Some stereo comes with very complicated fitting. The wires are very complex to attach and fix. Moreover, you should buy a stereo which causes less hassle during the installation process.

However, you should always be sure that you have all the accessories to fit them.

Conclusion

Now you know how to connect car stereo wires together. There are tons of stereo in the market. Always do some research before buying one. Moreover, there are multiple functions in the stereo. The ones equipped with apple car play and android auto are expensive. Whereas the normal ones are much cheaper.

Always go for the easy installation stereo. This will make your life easy and give a painless fitting and installing experience. You should at first remove the old stereo before starting your work.

Be careful and do not mess up the wire as this might damage the stereo itself or your vehicle wiring system. Disconnect the vehicle battery before starting your work as this will prevent you from any unwanted electrical shocks. This was all about how to connect car stereo wires together. Thanks!