If you want to change the oil in your C6 Corvette, here’s a glimpse of what to do:

• • • Park on a level surface.
    • Lift the front.
    • Remove the oil drain plug.
    • Let old oil drain into a pan.
    • Remove the old oil filter.
    • Apply oil to the new filter’s gasket and install it.
    • Tighten the drain plug and new filter.
    • Lower the vehicle.
    • Add new oil through the filler cap.

The glimpse is not what we will let you settle for. So, let’s briefly look at the whole process!

C6 Corvette Oil Change: Steps To Follow

Although you might need to gather a few gears before you opt for the oil change, the process is quite simple. First, gather the following gears, and then we will proceed with the steps.

Required Gears:

• New oil filter
• The right type of engine oil
• Oil drain pan
• Socket wrench and appropriate sockets
• Oil filter wrench
• Funnel
• Jack and Jack stands

Step- 1. Prepare The Vehicle

First, prepare the vehicle by placing it on a flat surface so it doesn’t move. If you have just used the vehicle, give it some time to cool off the engine. Once the engine is cool, lift the front of the vehicle using a jack and jack stands or a lift.

Step- 2. Drain Existing Oil

After lifting the vehicle, look at the bottom of the engine oil pan to find the oil drain plug. Then, hold the oil drain pan beneath the drain plug to gather the old oil. After placing the pan correctly, use a socket wrench to remove the oil drain plug. Once the old oil is all cleared out, you must clean the drain plug and its washer.

Step- 3. Replace The Oil Filter

Now, take an oil filter wrench to remove the old oil filter. Then, pour a small amount of new oil into the rubber gasket on the new filter. Then screw the filter onto the engine and tighten it using the wrench.

Step- 4. Add New Oil

Take the funnel and pour the oil into the engine’s oil filler cap. Then, wait a few minutes for it to settle into the oil pan. Once it’s settled, use your dipstick to check the oil level.

Step- 5. Check Again

After adding the new oil, you must re-check the oil drain plug and oil filter to ensure they are properly placed. Then, run your engine for a few minutes to allow the oil to circulate.

Tips For A Safe Oil Change In C6 Corvette

No matter how easy the oil-changing process is, there are a few things that you shouldn’t overlook. So, let’s give you a heads-up on this:

• Safety First: Always keep your vehicle stable before the oil change. Make sure that it doesn’t move before you get underneath the car.

• Old Oil Disposal: Remember to dispose of the old oil and clean the area before you put in the new oil. If you don’t, the mixture will abruptly affect engine performance.

• Properly Tightening the Oil Filter: When attaching the oil filter again, don’t overtighten it. Overtightening can make it difficult to remove during the next oil change.

• Lubricate The O-ring: If you want to make the whole oil-changing process easier next time, lubricate the rubber gasket’s O-ring properly with clean oil. This helps form a good seal and makes it more comfortable to remove the filter.

• Use A New Drain Plug Washer: If you have been using the old drain plug washer for a long time, replacing it with a new one during the oil change is better. This will prevent potential leaks.

SEE MORE: How to Clean K&N Air Filter

What Do You Do If You Notice Any Leaks?

If you notice leaks after performing an oil change on your C6 Corvette, it might be concerning to look further. But first, you need to inspect the oil drain plug area. Most leaks occur due to a lack of sealing in that area.

If the leak comes from the oil drain plug or the oil filter, you must ensure they are properly tightened. They shouldn’t be too tight or loose, as over-tightening may damage the threads or gaskets.

Sometimes, any damage in the gasket on the oil filter and the washer on the drain plug may cause leaks. So, if you notice any damage, you need to replace the gasket or washer with a new one.

What Type Of Oil Is Recommended For My C6 Corvette?

The type of oil required for your C6 Corvette may depend on your car’s specific engine type and year. However, C6 Corvettes typically use high-quality engine oils with specific viscosity and performance ratings.

Your user’s manual contains the proper oil usage instructions, the recommended viscosity, and any additional recommendations based on your climate and driving conditions.

SEE MORE: C5 Or C6: Which Corvette Engine is Worth Buying for You

Frequently Asking Questions (FAQs)

READ NEXT: Corvette C6 Problems

Wrapping Up

The C6 Corvette oil change doesn’t require much effort. But if you are new to this, ensure you are implying the necessary safety requirements before proceeding. Also, remember that using the wrong oil type may damage your engine or lower its performance. So, always buy the right engine oil according to the manufacturer’s recommendation.